Wind damage points to replacement when shingles are creased or unsealed across more than a small area, because the next gust will find the same weak seals. If you found shingles in the yard or lifted tabs after a thunderstorm, the signs below show what the damage means. Call (410) 438-1686 and tell us what you found.
How wind ratings work
Shingle wind ratings come from manufacturer tests, and a high label does not guarantee survival in every gust. Nailing matters as much as the label: ask for the nail count the manufacturer requires for the rating and your location, and have it written into the contract.
Reading the signs
- Shingles missing in the yard: the seal and nail hold failed.
- A horizontal crease across a shingle: it is bent and weakened even if still attached.
- Tabs that lift by hand: the sealing strip is no longer bonded.
- Displaced ridge caps: edge uplift, so check the starter and ridge.
- Exposed underlayment: the water path is open.
What to check before deciding
Look from the ground or with binoculars rather than walking the roof. Count how many slopes are affected and note the shingle age. Lifting everywhere on an old roof typically favours replacement, because aged seals rarely re-bond. Wind is often a covered peril, but terms vary, so read your policy.
Why edges and ridges fail first
Uplift pressure concentrates at ridges, rakes, eaves and corners, which is why starter strips and edge nailing matter. If the damage you see is mostly along an edge, ask the bidder how the new roof's starter course and edge flashing will be installed. Written answers beat verbal ones.
What to ask a bidder
Ask which wind rating the proposed shingle carries and what nailing pattern the maker requires for it. Ask how existing underlayment and deck will be inspected after tear-off. If creased shingles are your main concern, ask the bidder to show them on your roof rather than describe them.
Timing the replacement
Sealant bonds best in warm weather and more slowly in cool conditions, so if your replacement may slide into late autumn, ask the bidder how sealing will be verified. Photograph the roof when finished, including edges, ridges and rakes, so you have a baseline after the next big storm.
For new products see architectural shingle replacement, and for the wider decision read storm damaged roof replacement and common storm damage signs. Homeowners in Parkville and nearby can apply the same checks.
Technician insight
Creased shingles are among the most commonly missed forms of wind damage because they remain in place. Looking for horizontal creases and lifted tabs, not only missing pieces, gives a truer picture.
Wind Damaged Roof Services We Offer
✓Wind Damage Roof Replacement
Full replacement when uplift damage is widespread or shingles are creased and unsealed.
✓Wind-Resistant Shingle Installation
Shingles with higher wind ratings, installed per manufacturer specifications.
✓Flashing and Ridge Cap Replacement
New flashing and ridge caps as part of the replacement.
✓Underlayment and Deck Inspection
Inspection for hidden wind or water damage beneath the shingles.
How it works
- 1
Damage Assessment
We inspect the roof for lifted, creased and missing shingles and exposed underlayment, and document what we find.
- 2
Replacement Recommendation & Quote
If replacement is the sensible route, we provide a written quote outlining materials and scope.
- 3
Tear-Off & Deck Inspection
The old roofing is removed and the deck is checked, with damaged areas replaced.
- 4
New Roof Installation
The new roof is installed with attention to edges, ridges and flashing, where wind pressure is greatest.
- 5
Final Inspection & Cleanup
We inspect the finished roof and clean the site.
Pricing
We give a written quote after inspection; the price depends on the roof, the materials and access.